ProductsSYNTHETIC RESINSAlkyd resinsAM60ws55

Alkyd resin АM 60ws55 is a solution of fatty alkyd base, modified by fatty acids of the soybean oil in the dearomatised white spirit. It is used as a binder in the production of natural drying alkyd paint materials.

Specification

Appearance

Transparent resin, slight opalescence is possible

Lacquer purity

Layer of lacquer applied on the glass plate must be transparent and without particulate matter.

Color mg I2/100 ml,

20 max.

Brookfield viscosity, 20С, MPa s

1500 - 2500

Acid index in conversion to 100% resin, mg КОН/g,

15 max.

 

Drying time up to 3 degree, upon adding 2% drier LB-2 hours,

24 max.

Non-volatile matters mass fraction, %

54 - 56

Density, 20°C

0,92 g/cm³

Solubility

Soluble in white spirit, xylene, petroleum solvent. Not soluble in alcohols and in the water

 

AM 60ws55 resin is used for production of various air drying paint materials with the use of aliphatic solvents. AM 60ws55 resin-based materials dry up in 10-16 hours at 20°C, forming a weatherproof light coating with a high adhesion to metal and wood.

Thus, AM 60ws55 resin is used in general purpose alkyd varnishes and enamels, when simplicity and usability is required.

It is designed for the manufacture of coatings for wooden and metal surfaces, operated both inside and outside of the premises, as well as floor coverings.

<< Back