ProductsSYNTHETIC RESINSAlkyd resinsAMF45x55

Alkyd resin AMF 45x55 is a solution of semi-fat alkyd resin in xylene, modified by fatty acids of flaxseed and tung oil, rosin and phenol-formaldehyde resin. Used as a binder in production of natural drying corrosion-resistant paint and varnish materials.

Specification

Appearance

Transparent resin, slight opalescence is possible

Resin purity

Layer of lacquer applied on the glass plate must be transparent and without particulate matter

Colour mg I2/100 ml,

20 max.

Brookfield viscosity, 20°С, MPa s

300 - 600

Relative viscosity, 20°С, of 50% solution in xylene, ВЗ-4, s

80 - 120

Acid index in conversion to 100% resin, mg КОН/g,

10 max.

Drying time up to 3 degree, upon adding 2% drier LB-2 min,

360 max.

Non-volatile matters mass fraction, %

53 - 57

Density, 20°C

0,98 g/cm³

Solubility

Soluble in xylene, toluene, simple and compound esters

 

AMF 45x55 resin is used for production of air-drying paints and varnishes. AMF 45x55  resin-based materials dry and form a coating with high adhesion to steel and aluminum. Formation of a cross-linked film with a low permeability provides increased water and salt resistance that insures anti-corrosive properties.

AMF 45x55 resin is used in corrosion-resistant primers and base coat enamels and other paint and varnish materials, when a more flexible coating is required compared to AMF 30x60 resin-based materials.

<< Back